Integrations
ActiveMQ

ActiveMQ

Collect and Ship ActiveMQ application logs to Logstash and OpenSearch

Follow the steps below to ship ActiveMQ logs and metrics to your Logit.io stacks.

Logs

Filebeat is a lightweight shipper that enables you to send your ActiveMQ message queue logs to Logstash and Elasticsearch. Configure Filebeat using the pre-defined examples below to start sending and analysing your ActiveMQ message queue logs.

Install Integration

Please click on the Install Integration button to configure your stack for this source.

Install Filebeat

To get started you will need to install filebeat. To do this you have two main options:

  • Choose the AMD / Intel file (x86_64) or
  • Choose the ARM file (aarch64)

You can tell if you have a PC with an ARM CPU architecture by opening the Terminal application and running the arch command. If it displays arm64 you have ARM architecture.

To successfully install filebeat you will need to have root access.

If you have an x86_64 system download and install filebeat using the following commands:

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-8.15.2-amd64.deb
sudo dpkg -i filebeat-8.15.2-amd64.deb

If you have an aarch64 system download and install filebeat using the following commands:

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-8.15.2-arm64.deb
sudo dpkg -i filebeat-8.15.2-arm64.deb

Locate Configuration File

deb/rpm /etc/filebeat/filebeat.yml

Update your filebeat.yml file

Filebeat does not currently have a module to process the ActiveMQ application logs.

Therefore we need to add the ActiveMQ application log location to the filebeat inputs.

Add the following to the end of the log input example, before the filebeat.config.modules section.

###################### Logit.io Filebeat Configuration ########################
# ============================== Filebeat inputs ==============================
filebeat.inputs:
- type: filestream
  enabled: true
  paths:
    - /path/to/log/activemq/data/activemq.log*
  fields:
    type: activemq
    multiline.pattern: ^\=
    multiline.match: before
 
# ============================== Filebeat modules ==============================
filebeat.config.modules:
  path: ${path.config}/modules.d/*.yml
  reload.enabled: false
  #reload.period: 10s
 
# ================================== Outputs ===================================
# ------------------------------ Logstash Output -------------------------------
output.logstash:
  hosts: ["@logstash.host:@logstash.sslPort"]
  loadbalance: true
  ssl.enabled: true
 
# ================================= Processors =================================
processors:
  - add_host_metadata:
      when.not.contains.tags: forwarded
  - add_cloud_metadata: ~
  - add_docker_metadata: ~
  - add_kubernetes_metadata: ~

Validate Configuration

In the directory where Filebeat is installed, run the following command to validate the installation:
.\@beatname.exe test config -c @beatname.yml

If the yml file is invalid, @beatname will print a description of the error. For example, if the output.logstash section was missing, @beatname would print no outputs are defined, please define one under the output section

Start Filebeat

To start Filebeat, run in Powershell:

Start-Service filebeat

Launch Logit.io to view your logs

Data should now have been sent to your Stack.

View My Data

If you don't see take a look at How to diagnose no data in Stack below for how to diagnose common issues.

How to diagnose no data in Stack

If you don't see data appearing in your stack after following this integration, take a look at the troubleshooting guide for steps to diagnose and resolve the problem or contact our support team and we'll be happy to assist.

Metrics

Configure Telegraf to ship ActiveMQ metrics to your Logit.io stacks via Logstash.

Install Integration

Please click on the Install Integration button to configure your stack for this source.

Install Telegraf

This integration allows you to configure a Telegraf agent to send your metrics, in multiple formats, to Logit.io.

Choose the installation method for your operating system:

When you paste the command below into Powershell it will download the Telegraf zip file. Once that is complete, press Enter again and the zip file will be extracted into C:\Program Files\InfluxData\telegraf\telegraf-1.31.2.

wget https://dl.influxdata.com/telegraf/releases/telegraf-1.31.2_windows_amd64.zip -UseBasicParsing -OutFile telegraf-1.31.2_windows_amd64.zip 
Expand-Archive .\telegraf-1.31.2_windows_amd64.zip -DestinationPath 'C:\Program Files\InfluxData\telegraf'

Configure the Telegraf input plugin

The configuration file below is pre-configured to scrape the system metrics from your hosts, add the following code to the configuration file /etc/telegraf/telegraf.conf from the previous step.

# Gather ActiveMQ metrics
[[inputs.activemq]]
  ## ActiveMQ WebConsole URL
  url = "http://127.0.0.1:8161"
 
  ## Required ActiveMQ Endpoint
  ##   deprecated in 1.11; use the url option
  # server = "192.168.50.10"
  # port = 8161
 
  ## Credentials for basic HTTP authentication
  # username = "admin"
  # password = "admin"
 
  ## Required ActiveMQ webadmin root path
  # webadmin = "admin"
 
  ## Maximum time to receive response.
  # response_timeout = "5s"
 
  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false

Read more about how to configure data scraping and configuration options for ActiveMQ (opens in a new tab)

Configure The Output plugin

Once you have generated the configuration file, you need to set up the output plug-in to allow Telegraf to transmit your data to Logit.io in Prometheus format. This can be accomplished by incorporating the following code into your configuration file:

[[outputs.http]]
  url = "https://@metricsUsername:@metricsPassword@@metrics_id-vm.logit.io:@vmAgentPort/api/v1/write"
  data_format = "prometheusremotewrite"
 
  [outputs.http.headers]
    Content-Type = "application/x-protobuf"
    Content-Encoding = "snappy"

Start Telegraf

From the location where Telegraf was installed (C:\Program Files\InfluxData\telegraf\telegraf-1.31.2) run the program providing the chosen configuration file as a parameter:

.\telegraf.exe --config telegraf-demo.conf

Once Telegraf is running you should see output similar to the following, which confirms the inputs, output and basic configuration the application has been started with: Powershell Telegraf information

View your metrics

Data should now have been sent to your Stack.

View My Data

If you don't see take a look at How to diagnose no data in Stack below for how to diagnose common issues.

How to diagnose no data in Stack

If you don't see data appearing in your stack after following this integration, take a look at the troubleshooting guide for steps to diagnose and resolve the problem or contact our support team and we'll be happy to assist.

Active DirectoryAerospike